Laminated Dock Bumpers
|
 |
|
Laminated Rubber Dock Bumpers
Comes in two models; bumpers with angles for most
applications - equipped with 3/8" (0.5mm) steel
angles on both ends; and bumpers with flat plate for use with dock
levelers - optional 3/8" (0.5mm) flat steel plate for one or both ends.
Have unlimited applications in factories,
warehouse and docks:
- Vehicle impact protection for loading docks
- Projecting above low docks
- Rub rails at the sides of truck walls
- Wall bumpers to protect against fork lift
trucks
- Special construction features to
accommodate unusual anchoring conditions.
|
|
 |
|
Extra-Length Laminated Bumpers
- Primarily used in conjunction with dock-seal
- Ideal where dock refrigeration or warmth is needed.
|
|
 |
|
Extra-Thick Laminated Bumpers
Comes in two models; bumpers with angles for most
applications-equipped with 3/8" (0.25 mm) angles on both ends; and bumpers
with flat plate for use with dock levelers-optional 3/8" (0.25 mm) flat
steel plate for one or both ends. Where greater "stand out" distance from
dock sills is required due to steep ramps, canopied docks, overhangs, or
other architectural features. |
|
 |
|
Steel Face Dock Bumpers
Ideal for use in docking areas where excessive friction from
up-and-down trailer movement occurs.
Can be used in any material-handling system area where heavy-duty
protections required. |
DOCK BUMPERS
|
|
Dock bumpers are weather-resistant, easily installed and
long-lasting to protect dock equipment, building wall, and truck cargo
from potential damage.
Dock bumpers are an excellent alternative to easily splintered,
non-resilient, short-lived wood bumpers. |
Laminated Bumpers
Bumper pads to be nylon impregnated heavy
duty industrial rubber. Pad size to be either 4-1/2" projection x 10"H
or 5-1/2" projection x 10"H (Please Specify) and punched to receive 5/8"
supporting rods.
All Laminated Dock Bumpers to be assembled with
two 3" x 3" x 1/4" thick steel angles. The angles are to be fastened
with threaded rod and nut. All exposed metal part are to be factory
painted.
|
Molded Dock Bumpers
Molded Dock Bumpers to be made of nylon
cord reinforced rubber compound. Bolts are to be recessed to prevent
damage.
OPTIONS
1. Bumper risers 2. Bumper extensions 3. Steel face
|
 |
 |
|
